Unity 安卓真机DEBUG
发表于2018-01-12
1.首先在手机上开启USB调试功能，并安装驱动（这一步很多手机助手都可以完成）。
2.用USB电缆连接手机和电脑。
3.确保手机和电脑在一个局域网内，简单的说就是电脑和手机共用一个路由器，网段一样。
4.打开电脑上CMD窗口，输入以下命令：
adb tcpip 5555（该命令打开手机adb网络调试功能）
正常情况下输入命令后控制台会出现回显
restarting in TCP mode port: 5555
打开手机查看手机的IP地址（不会请百度）假设手机的地址是192.168.1.x输入命令
adb connect 192.168.1.x
如果一切正常控制台会回显以下内容
connected to 192.168.1.x:5555
如果你想查看是否连接成功请输入以下内容
adb devices
控制台会回显连接的设备
5.如果一切连接成功，请拔掉USB电缆，选择File->Build&Run，在编译之前要勾选上Development Build 和Script Debugging这两项（在build setting里面勾选不要忘记否则是不能调试的）电脑会自动编译文件并将APK推送至手机，在手机上同意并安装。
6.当程序运行后再Monodevelop里面打开Run->Attach to process 会发现你手机的选项，选择手机，在脚本里面添加断点，你发现可以调试了，那叫一个爽！出现问题再也不用去瞎猜，或者添加Debuglog了。
laiiz
开发过程中，解决各种问题bug，不管是性能问题还是ANR问题，还是各种严重崩溃问题，经常需要抓取log，从log中分析找到问题源头，并进行修改。
但是，统一时间点下，可能会有很多log打印出来，分属于各个不同的进程。因此，我们需要的部分可能已经被淹没了。因此，使用工具或者命令抓取需要的log部分，并尽可能少的减少遗漏，是非常有必要的。
通常情况下，可以使用工具。
因此，使用命令抓取变得很重要，这里就自己总结下adb相关的命令。
比如eclipse 的logcat可以直接查看log输出，但是有个问题就是在手机设备没有连接的情况下，是很恼火的。比如我需要开机log,可以直接使用adb抓取到txt文件中就OK了。google的同时自己整理了一下。不喜勿喷。
adb logcat 命令使用帮助说明；
logcat: option requires an argument -- v
Unrecognized Option
Usage: logcat [options] [filterspecs]
options include:
-s Set default
filter to silent.
Like specifying filterspec '*:s'
-f <filename> Log to file. Default to stdout
-r [<kbytes>] Rotate log every kbytes. (16
if unspecified). Requires -f
-n <count> Sets max number of rotated logs to <count>, default
4
-v <format> Sets the log print format, where <format> is one of:
brief process tag thread raw time threadtime long
-c clear (flush) the entire log and exit
-d dump the log and then exit (don't block)
-t <count> print only the most recent <count> lines (implies -d)
-g get the size of the log's ring buffer and exit
-b <buffer> Request alternate ring buffer, 'main', 'system', 'radio'
or 'events'. Multiple -b parameters are allowed and the
results are interleaved. The default
is -b main -b system.
-B output the log in binary
filterspecs are a series of
<tag>[:priority]
where <tag> is a log component tag (or * for
all) and priority is:
V Verbose
D Debug
I Info
W Warn
E Error
F Fatal
S Silent (supress all output)
'*'
means '*:d'
and <tag> by itself means <tag>:v
If not specified on the commandline, filterspec is set from ANDROID_LOG_TAGS.
If no filterspec is found, filter defaults to '*:I'
If not specified with -v, format is set from ANDROID_PRINTF_LOG
or defaults to "brief"
</tag></tag></tag></tag></buffer></count></count></format></format></count></count></kbytes></filename>
抓取log之前先清除缓存的log信息。
appledeMacBook-Pro:~ apple$ adb logcat -c appledeMacBook-Pro:~ apple$
或者你可以这样写
appledeMacBook-Pro:~ apple$ adb logcat -c && adb logcat --------- beginning of /dev/log/main E/cynicok (16917): receive a heartbeat msg: H! I/Wisdom_ConnectSdk(16917): request long connection success and the state = 200 I/Wisdom_ConnectSdk(16917): receive the heart message H这样查看晕死。。。。
appledeMacBook-Pro:~ apple$ adb logcat --------- beginning of /dev/log/main D/AppOps ( 1989): startOperation: allowing code 40 uid 1000 package android D/NtpTrustedTime( 1989): currentTimeMillis() cache hit --------- beginning of /dev/log/system D/PowerManagerService( 1989): newScreenState = 0 D/PowerManagerService( 1989): updateDisplayPowerStateLocked: mBootCompleted = true, mScreenBrightnessSettingDefault = 165 D/PowerManagerService( 1989): updateDisplayPowerStateLocked: xxxx = 187 D/PowerManagerService( 1989): Package Lib: shouldUseProximitySensorLocked mLidMode = false D/PowerManagerService( 1989): updateDisplayPowerStateLocked: yyyyy = 187 D/PowerManagerDisplayController( 1989): changed is false, mPendingRequestChangedLocked = false D/NtpTrustedTime( 1989): currentTimeMillis() cache hit D/NtpTrustedTime( 1989): currentTimeMillis() cache hit
使用I,V,D,E,F,W等过滤
和Log.i ,Log.e ,Log.d,Log.w等对应。
appledeMacBook-Pro:~ apple$ adb logcat *:I --------- beginning of /dev/log/main --------- beginning of /dev/log/system E/cynicok (16917): receive a heartbeat msg: H! I/Wisdom_ConnectSdk(16917): request long connection success and the state = 200 I/Wisdom_ConnectSdk(16917): receive the heart message H E/cynicok (16917): receive a heartbeat msg: H! I/Wisdom_ConnectSdk(16917): request long connection success and the state = 200 I/Wisdom_ConnectSdk(16917): receive the heart message H E/cynicok (16917): receive a heartbeat msg: H! I/Wisdom_ConnectSdk(16917): request long connection success and the state = 200 I/Wisdom_ConnectSdk(16917): receive the heart message H
上面输出全部是Log.i打印出来的Log.
输出指定标签的日志.后面必须是*:S
appledeMacBook-Pro:~ apple$ adb logcat Wisdom_ConnectSdk:* *:S
--------- beginning of /dev/log/main
--------- beginning of /dev/log/system
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
appledeMacBook-Pro:~ apple$ adb logcat -v time --------- beginning of /dev/log/main 02-08 12:18:48.700 D/eup (17972): rqdp｛ current unseen pn:｝com.tencent.androidqqmail:Push 02-08 12:18:49.810 D/MSF.C.NetConnTag( 2700): [E]netRecv ssoSeq:2023997818 uin:*9889 cmd:-316037937 2023998098 02-08 12:18:49.840 D/Q.msg.TroopMsgProxy(18335): [E]insertToList MessageRecord=friendUin:2824senderuin:9517,istroop:1,msgType:-1000,time:1423369131,shmsgseq:33949 02-08 12:18:50.630 D/MSF.C.NetConnTag( 2700): [E]netRecv ssoSeq:2024000051 uin:*9889 cmd:961141751 2024000635 02-08 12:18:50.665 D/MSF.C.NetConnTag( 2700): [E]pa ok: 93239 02-08 12:18:50.670 D/MSF.C.NetConnTag( 2700): [E]netSend ssoSeq:93239 uin:*9889 cmd:-183665717 93419 --------- beginning of /dev/log/system
-v 设置log的打印格式。上面的time显示时间。
process 只显示进程id
appledeMacBook-Pro:~ apple$ adb logcat -c appledeMacBook-Pro:~ apple$ adb logcat -v process --------- beginning of /dev/log/main E(16917) receive a heartbeat msg: H! (cynicok) I(16917) request long connection success and the state = 200 (Wisdom_ConnectSdk) I(16917) receive the heart message H (Wisdom_ConnectSdk)-v tag按照标签来打印。
appledeMacBook-Pro:~ apple$ adb logcat -v tag --------- beginning of /dev/log/main E/cynicok : receive a heartbeat msg: H! I/Wisdom_ConnectSdk: request long connection success and the state = 200 I/Wisdom_ConnectSdk: receive the heart message H I/System.out: AsyncExecImpl : add task, s = 1 D/SyncMainManager: requestInstantSync check local data : quickReply --------- beginning of /dev/log/system D/ActivityManager: Not moving, persistent: ProcessRe-v thread 显示 I ，D E等日志类型，16917：16936 进程ID：线程ID
appledeMacBook-Pro:~ apple$ adb logcat -v thread
--------- beginning of /dev/log/main
E(16917:16936) receive a heartbeat msg: H!
I(16917:16917) request long
connection success and the state = 200
I(16917:16917) receive the heart message H
I( 2235: 2235) AsyncExecImpl : add task, s = 1
D( 2235:20109) requestInstantSync check local data : quickReply
--------- beginning of /dev/log/system
D( 1989: 3972) Not moving, persistent: ProcessRecord｛41fd2488 2173:com.android.phone/1001｝
D( 1989: 2186) noteOperation: allowing code 14
uid 10042
package com.meizu.mzsyncservice
adb logcat | grep PID
adb logcat | grep --color= auto PID
appledeMacBook-Pro:~ apple$ adb logcat | grep 16917
E/cynicok (16917): receive a heartbeat msg: H!
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
I/Wisdom_ConnectSdk(16917): receive the heart message H
E/cynicok (16917): receive a heartbeat msg: H!
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
I/Wisdom_ConnectSdk(16917): receive the heart message H
带颜色的Log
appledeMacBook-Pro:~ apple$ adb logcat | grep --color=auto 16917
E/cynicok (16917): receive a heartbeat msg: H!
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
I/Wisdom_ConnectSdk(16917): receive the heart message H
E/cynicok (16917): receive a heartbeat msg: H!
先查看程序进程pid。下面这个命令也可以看到该进程使用内存相关情况。
appledeMacBook-Pro:~ apple$ adb shell dumpsys meminfo com.wisdom.wisdomapp
Applications Memory Usage (kB):
Uptime: 14917420
Realtime: 24328990
** MEMINFO in pid 16835
[com.wisdom.wisdomapp] **
Pss Private Private Swapped Heap Heap Heap
Total Dirty Clean Dirty Size Alloc Free
------ ------ ------ ------ ------ ------ ------
Native Heap 0
0 0 0 22396 20994 653
Dalvik Heap 26814
26660 0 0 29228 28344 884
Dalvik Other 1603
1512 0 0
Stack 24
24 0 0
Other dev 4
0 4 0
.so mmap 1125
732 0 0
.apk mmap 5
0 0 0
.ttf mmap 0
0 0 0
.dex mmap 307
28 0 0
Other mmap 10
8 0 0
Unknown 20246
20240 0 0
TOTAL 50138
49204 4 0 51624 49338 1537
查看当前系统中正在跑的service
appledeMacBook-Pro:~ apple$ adb shell service
Usage: service [-h|-?]
service list
service check SERVICE
service call SERVICE CODE [i32 INT | s16 STR] ...
Options:
i32: Write the integer INT into the send parcel.
s16: Write the UTF-16
string STR into the send parcel.
列出service
appledeMacBook-Pro:~ apple$ adb shell service list Found 92 services: 0 secsystemserver: [com.lbe.security.service.core.loader2.internal.ISystemServer] 1 secloader2: [com.lbe.security.service.core.loader2.internal.ILoaderServiceEx] 2 sip: [android.net.sip.ISipService] 3 phone_ext: [com.meizu.telephony.ITelephonyExt] 4 phone: [com.android.internal.telephony.ITelephony] 5 iphonesubinfo: [com.android.internal.telephony.IPhoneSubInfo] 6 simphonebook: [com.android.internal.telephony.IIccPhoneBook] 7 isms: [com.android.internal.telephony.ISms] 8 gesture_manager: [android.view.IGestureManager] 9 deivce_states: [android.os.IDeviceStateService] 10 access_control: [android.content.IAccessControlManager] 11 media_router: [android.media.IMediaRouterService] 12 print: [android.print.IPrintManager] 13 dreams: [android.service.dreams.IDreamManager]
有人写了个脚本查看log，具体地址忘了，怪我只保存了脚本内容，却把来源忘了。
python值得学习。有空是要学习下。
#!/usr/bin/env python
#coding:utf-8
#This script is aimed to grep logs by application(User should input a packageName and then we look up for
the process ids then separate logs by process ids).
import
os
import
sys
packageName=str(sys.argv[1])
command = "adb shell ps | grep %s | awk '｛print $2｝'"%(packageName)
p = os.popen(command)
##for
some applications,there are multiple processes,so we should get all the process id
pid = p.readline().strip()
filters = pid
while(pid != ""):
pid = p.readline().strip()
if
(pid != ''):
filters = filters + "|"
+ pid
#print 'command = %s;filters=%s'%(command, filters)
if
(filters != '') :
cmd = 'adb logcat | grep --color=always -E "%s" '%(filters)
os.system(cmd)
appledeMacBook-Pro:Desktop apple$ python logcat.py com.wisdom.wisdomapp
E/cynicok (16917): receive a heartbeat msg: H!
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
I/Wisdom_ConnectSdk(16917): receive the heart message H
E/cynicok (16917): receive a heartbeat msg: H!
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
I/Wisdom_ConnectSdk(16917): receive the heart message H
E/cynicok (16917): receive a heartbeat msg: H!
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
I/Wisdom_ConnectSdk(16917): receive the heart message H
E/cynicok (16917): receive a heartbeat msg: H!
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
I/Wisdom_ConnectSdk(16917): receive the heart message H
E/cynicok (16917): receive a heartbeat msg: H!
I/Wisdom_ConnectSdk(16917): request long
connection success and the state = 200
ps命令过滤查看。
appledeMacBook-Pro:Desktop apple$ adb shell shell@mx2:/ $ ps | grep com.meizu.flyme.weather system 9175 1567 880208 32432 ffffffff 00000000 S com.meizu.flyme.weather shell@mx2:/ $
adb 这么多命令，我该快速的用呢。其实早就有大神解决了这个问题。
git 地址 :https://github.com/JakeWharton/pidcat
这个开源代码pidcat在mac上面使用需要安装HomeView
^CappledeMacBook-Pro:Desktop apple$ ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" ==> This script will install: /usr/local/bin/brew /usr/local/Library/... /usr/local/share/man/man1/brew.1 Press RETURN to continue or any other key to abort ==> /usr/bin/sudo /bin/mkdir /usr/local Password: ==> /usr/bin/sudo /bin/chmod g+rwx /usr/local ==> /usr/bin/sudo /usr/bin/chgrp admin /usr/local ==> /usr/bin/sudo /bin/mkdir /Library/Caches/Homebrew ==> /usr/bin/sudo /bin/chmod g+rwx /Library/Caches/Homebrew ==> Downloading and installing Homebrew... remote: Counting objects: 229812, done. remote: Compressing objects: 100% (60244/60244), done. remote: Total 229812 (delta 168312), reused 229812 (delta 168312) Receiving objects: 100% (229812/229812), 52.82 MiB | 1022 KiB/s, done. Resolving deltas: 100% (168312/168312), done. From https://github.com/Homebrew/homebrew * [new branch] master -> origin/master HEAD is now at 9a0fbf6 moreutils: update 0.55 bottle. ==> Installation successful! ==> Next steps Run `brew doctor` before you install anything Run `brew help` to get started appledeMacBook-Pro:Desktop apple$
截取
Viewing Alternative Log Buffers
Android日志系统为日志消息保持了多个循环缓冲区，而且不是所有的消息都被发送到默认缓冲区，要想查看这些附加的缓冲区，可以使用-b 选项，以下是可以指定的缓冲区：
radio — 查看包含在无线/电话相关的缓冲区消息
events — 查看事件相关的消息
main — 查看主缓冲区 (默认缓冲区)
-b 选项的用法：
[adb] logcat [-b <buffer>]</buffer>
例如查看radio缓冲区：
adb logcat -b radio
保存Log到sd卡。
appledeMacBook-Pro:~ apple$ adb logcat -d -f /sdcard/test_log.txt appledeMacBook-Pro:~ apple$
配置adb环境变量，并且将变量添加到
.bashrc or .zshrc 两个文件中export PATH=$PATH:/Users/apple/Documents/Tools/IDE/adt-bundle-mac-x86_64-20131030/sdk/tools:/Users/apple/Documents/Tools/IDE/adt-bundle-mac-x86_64-20131030/sdk/platform-tools并且要保证.bash_profile也配置好adb。